Simple Pearl Necklace DIY with Ribbon

Hello, friends. Happy to see you. Hope everything is great with you. Today I am going to show you a necklace tutorial made by grey pearl beads and ribbon. You can try to make one for yourself if you like it. Now, let’s see the details.

Supplies needed in making pearl necklace with ribbon:

8MM Gray Glass Pearl Beads
2MM Silver Round Seed Beads
Organza Ribbon
Tiger Wire

Step 1: make basic beading chain

Firstly, cut off the tiger tail about 150cm, and slide 16 round seed beads onto this wire.

Secondly, cross a seed bead onto both wires and tighten the wires.

Thirdly, slide 6 round seed beads onto one wire, and a seed bead, a pearl bead and a seed bead onto the other wire. Then cross a seed bead to both wires and tighten them.

Fourthly, slide a seed bead, a pearl bead and a seed bead onto the wire and slide 6 seed beads onto the other wire, then cross a seed bead and tighten them.

Fifthly, repeat the sliding and crossing, then you can get the pattern like this picture.

Step 2: finish this beading chain making

Firstly, add 7 seed beads to one wire and 8 seed beads to other wire.

Secondly, cross two wires onto the last seed beads and tighten wire.

Thirdly, add the beading path and conceal the extra wires.

Step 3: finish this necklace making

Firstly, cut off a piece of ribbon and add it to the end of the circles.

Secondly, make a bow tie with the ribbon.

Then this pearl and seed beads necklace has been finished!

How do you think of this pearl necklace after seeing the making details? Why not try to make one? You know that pearl necklace are always well matched with your dress, so do not hesitate, just take an action. Looking forward your works!

DIY Simple Beaded Cluster Earrings You Should Collect

Hello, guys. Nice to see you. How are you? Hope everything is going well with you and your lovely family. Do you need any great earrings tutorials recently? If yes, then you should pay more attention to this project. Today, I am going to show you a simple tutorial on how to make a pair of cluster earrings with pearl beads and seed beads. Expecting it? Now let’s begin!

Supplies needed in making beaded cluster earrings:

2mm Purple seed beads
6mm White Glass Pearl Beads
0.3mm Copper Wire
Silver Earring Hook
Scissors

Step 1: make beaded dangles

Firstly, cut off a piece of cooper wire and slide a purple seed bead to the middle part of the wire. Then fold the wire into halves.

Secondly, slide a 6mm pearl bead and eleven 3mm purple seed beads onto the both wires to make a beaded dangle.

Thirdly, continue to make another same nine beaded dangles with the same steps.

Step 2: finish the cluster earrings

Firstly, cut off two pieces of cooper wires and twist the ten bead dangles together with the cooper wires and tighten them.

Secondly, add an earring hook to the top of the cooper wire to finish the earring making.

Step 3: make another same earring with the above same steps.

Then this pair of cluster earrings with pearl beads and seed beads has been finished.

This project is a great choice for beginners to have a nice try. So do not hesitate if you like this tutorial and also want to start your first step. Trust me, you will be satisfied with your craft then. See you next time!

Macrame Bracelet Making with Pearl Beads and Blue Nylon

Hey, guys. How are you doing? Do you want to make a bracelet recently? If yes, then look here and you will be satisfied with this post. Today I am going to show you a tutorial on how to make a macramé bracelet with pearl beads and blue nylon. Trust me, you will plan to make one after seeing this article. Now, let’s move on!

Supplies needed in making macramé bracelet:

8mm white pearl beads
Sea horse pendant
10mm rhinestone beads
6mm white pearl bead
Headpin
Jump ring
2mm dark blue nylon thread
Memory wire
Wire cutting plier
Flat plier
Round nose plier

Step 1: make the basic part of the pattern

Firstly, cut off the memory wire about 3 circles, and make a loop at the end.

Secondly, cut off a piece of nylon thread about 80cm, fold it in half and make a knot close to the loop. Then slide an 8mm pearl bead onto the wire and tie a knot.

Thirdly, slide another pearl bead to the wire and make beaded pattern.

Step 2: finish this bracelet making

Firstly, continue to slide beads and making knots, until you cover the memory wire. Then make a make a loop at the end, fix the nylon and wire together.

Secondly, slide a pearl bead, a rhinestone bead onto a headpin, and make a simple loop. Then connect the dangle and sea horse pendant with a jump ring.

Thirdly, add the dangle to the end loop of the wire bracelet design.

Then this pearl macramé bracelet has been finished!

Not really difficult, right? Do you want to make one for yourself now? You can not only get a pretty bracelet but also feel more pleasure from the process. So do not miss this wonderful project. 

Glass beads, Know The What’s And Make A Wise Purchase

Glass beads are popular component of jewelry, especially the handcrafted beads. Recently, you can find glass beads in most jewelry type, regardless of whether it is a necklace, earring, anklet, pendant or a bracelet. Moreover these beads are available on the internet and in the local jewelry stores.

What to consider?

Glassbeads most types are handmade and such beads quality depends on the artisan’s expertise. So, choosing glass beads in wholesale for jewelry creation is recommended as the best, yet pay proper attention to the style. Nevertheless, style alone is not everything to consider. There are other aspects worth considering while buying in bulk.

What to look for in glass beads?

Glass beads can be bought in wholesale, but you must see if these beads have something more eye appealing to offer. However, here are some valuable points worth looking for before buying them.

·         The beads ends are very important. So do check for sharp edges mainly because the quality ones lack them. In case the ends differ, consider shopping in another shop. Looking for ends puckered or indented is mandatory. This is because beads having sharp ends will cut your beading thread or wire and may hurt you while working.

·     Do beads come with dots and if they have dots, it must be rightly anchored. However, determining this is hard while buying wholesale online. So, pay close attention to the provided pictures. The dots must not be in any mushroom size, so check for a small dot in the beads.

What are Quality glass beads?

Quality glass beads are the beads that are perfectly encased and must not have or have very little bubbles. Such types of bubbles are intentionally added so that the beads look really beautiful, but in case they are unintentional, it claims to be of poor quality.

The beads color and cost are the main factors worth considering in glass beads. The color complements the entire beading project and so considering the budget is also important. The beads cost is depending on the manufacturer and the method used in creation. Beads consist dots, complex twists, stringer are mostly expensive than the plain beads. Especially, the hand shaped beads such as the barrels, round beads and bicones are tough beads than the pressed beads, so likely the price tag is also slightly higher. If you are placing order for wholesale quantity, ask for free shipping and handling.

Excellent Tutorial on How to Make to Multi Strands Bracelet with Glass Beads

Hey, guys. How are you doing? Have you made any jewelry or crafts recently? If not, today you can try one. I am going to show you how to make a multi-strands bracelet with glass beads. It sounds great, right? Then let’s see the tutorial soon~

Supplies needed in making multi strands bracelet:

8mm red glass beads

2mm red seed beads

Crimp beads

Tibetan silver spacer beads

5 strand slide lock clasp

Tiger tail

Wire cutting plier

Flat plier

Step 1: make bracelet beaded pattern

Firstly, cut off three 30cm tiger tails, and add them on the first, third and fifth loops, then slide a crimp bead onto them respectively to fix them.

Secondly, slide four seed beads, a glass bead and four seed beads onto the first and fifth wires. And slide a glass bead, six seed beads and a glass bead onto the middle wire.

Thirdly, add a Tibetan sliver spacer beads after them.

Fourthly, continue to add the beads and spacer beads with the same steps until you get your desired length. Then add a lock clasp, add the three wire to them.

Step 2: finish this multi strands bracelet

Connect the two ends of the bracelet.

Then this red beaded bracelet has been finished!

Now, have you got the skills of this bracelet making? You can make it with following the tutorial, and trust me you also can finish it successfully. It is a great idea that you can change the color of the beads if really do not like red color. Please do not forget to share your crafts with me. Hope you like it!