DIY Jewelry - Copper Wire Wrapped Ring

This tutorial is going to introduce how to make a beaded wire ring with simplest tools and materials. If you like this simple yet delicate diy wire wrapped ring, follow this tutorial to learn how to make it.

You only need these materials and tools:

1.5mm Silver Aluminum Wire

0.5mm Red Copper Wire

4mm Blue Bicone Glass Bead

Side Cutting Pliers

Long Nose Plier

Then, follow these steps to make this beaded wire ring.

Step 1: cut off five pieces of aluminum wires, and make sure they are of equal lengths;

Step 2: wind a piece of copper wire around the first aluminum wire, then add the second aluminum wire. Wrap them with the copper wire;

Step 3: add the third aluminum wire, then use the copper wire to wrap around it and the second one;

Step 4: in this way, wrap the copper wire around the fourth and the fifth aluminum wires;

Step 5: wrap around the whole pattern like the second picture shows;

Step 6: wrap around the top two aluminum wires, then wrap the second and the third. In this way, wrap more copper wires until it gets to the bottom aluminum wire;

Step 7: wrap around the bottom aluminum wire;

Step 8: wrap more copper wires around the aluminum wires like the picture shows;

Step 9: slide a blue bicone glass bead onto the copper wire, then fix it onto the pattern;

Step 10: continue to wrap more copper wires;

Step 11: cut off other four aluminum wires except the middle one, then use copper wires to wrap the two ends together like the picture shows;

Step 12: cut off extra copper wires.

This is the final look of the copper wire wrapped ring.

Here is another picture~

We spent some time making this copper wire wrapped ring. But it’s fair to say that this wire work ring is not very hard to make. You just need to devote some patience and deal with every detail with carefulness. So, hurry up to have a try on this diy wire wrapped ring.