How to Make a Tibetan Style Silver Beaded Hair Jewelry

Do you want to learn how to make this Tibetan style silver hair accessory showed in the below picture? It looks perfect, right? Let me tell you, it’s more beautiful and chic when you look at them directly. Its design idea is borrowed from Tibetan style jewelries, and by decorating this hair jewelry with pearl beads and glass beads, it becomes more ornate than others.

These materials and tools will be needed to make this beaded hair jewelry:

Fish Tibetan Style Chandelier Components

12mm White Glass Pearl Beads

8mm White Glass Pearl Beads

6mm White Glass Pearl Beads

4mm White Glass Pearl Beads

8x6mm Clear Glass Beads

15x10mm DarkTurquoise Glass Beads

Tibetan Style Flower Links

Flower Bead Caps

Iron Cross Chains

Silver Eyepins

Silver Headpins

Side Cutting Pliers

Round Nose Pliers

Then, follow these steps to make the silver hair jewelry:

Step 1: use pins and beads to make these five elements like the picture shows.

Step 2: use the round nose plier to connect the eyepin with a pearl bead to the dark turquoise glass bead and the flower bead cap to make a pendant.
Step 3: connect the pendant to the middle hole of the chandelier component. Connect other four elements to other holes of the chandelier component.

Step 4: slide a clear glass bead and a 12mm pearl bead onto a headpin and connect them to the center of the chandelier component.

Step 5: slide a 8mm pearl bead onto an eyepin, then connect one end of the eyepin to a flower link. Connect another end of the eyepin to the top of the chandelier component.

Step 6: make 4 dangles like the picture shows.

Step 7: use an eyepin to fix a 8mm pearl bead in the middle. Connect the two ends of the eyepin to 2 dangles.

Step 8: in same way, make another piece of beaded chain. Connect these two chains to the right side of the flower link. Connect other two ends of these two chains to another piece of flower link.

Step 9: make other two chains and connect them to the left side of the flower link and then connect them with another flower link like picture shows.

Step 10: use eyepins to connect 8mm pearl beads and clear glass beads alternatively to make a beaded chain. Connect the two ends of the chain to the two flower links.

Step 11: connect a 8mm pearl bead and a 6mm pearl bead to the flower link on the right side like the picture shows. Then use two pieces of chains to link these pearl beads with the beaded dangles.

Step 12: imitate step 11 to complete the left side.

This is the final look of the silver beaded hair jewelry, do you love it?

OK, by now I have shared all my experience with you about how I made this hair accessory. Hope it can give you some inspirations. And if you have better designs, you can share with me too. Do you like this tutorial? I will talk to you later in my next blog.

An Easy Tutorial For Beginners: Handmade Gemstone Necklace

This is an easy tutorial on how to make a pink bead necklace made of gemstone pendants and jade beads. If you like this necklace, you should give it a try to make one by yourself. This jade bead necklace is suitable for many different occasions. For example, party, summer vacation, or you can also send it out as gift to a friend or hang it in the room as a decor.

These are the materials will be used to make this handmade gemstone necklace:
19x15mm Oval Gemstone Beads
21x11x10mm Gemstone Pendants
10mm Natural Mashan Jade Beads
10x8mm Abacus Jade Beads
8x6mm Abacus Jade Beads
Platinum Column Magnetic Clasps
0.2mm White Fishing Wire
Stainless-Steel Scissor

Then you need to follow these steps to make the necklace.
Step 1: cut off a piece of fishing wire, and cross it through one end of the magnetic clasp. Make sure the two parts of the wire besides the magnetic clasp are of equal lengths.
Step 2: cross both ends of the wire through some 8*6mm abacus jade beads and 10mm natural Mashan jade beads like the picture shows.
Step 3: slide a gemstone pendant onto the fishing wire and then slide one 8*6mm abacus jade bead, one oval gemstone bead, another 8*6mm abacus jade bead onto the wire. 

Step 4: repeat step 3 to slide more gemstone pendants, gemstone beads, and jade beads onto the wire. 
Step 5: slide more 8*6mm abacus jade beads and 10mm natural Mashan jade beads to complete the necklace. Cross the wire through another end of the magnetic clasp and make a knot. Cut off extra wires.

Step 6: cut off another piece of fishing wire and slide about 32 pieces 8*6mm abacus jade beads and 9 pieces 10x8mm abacus jade beads onto the wire to make a beads string.
Step 7: tie the two ends of this beads string on each side of the necklace. And cut off extra wires.

Here is the final look of this handmade gemstone necklace.

Jobs are done really quickly, then you can own this beautiful gemstone pendant necklace. After finishing this one, you could choose your favorite colors to design an original one, or you can add more cute pendants to the necklace. Hope you enjoy this tutorial!

Christmas Gift For This Year: A Pair of Christmas Dangle Earrings

Christmas day is approaching, everybody wants to prepare something special for the holiday. Why don’t you make yourself this pair of cute diy Christmas dangle earrings? They are really beautiful, aren’t they? If you agree, please follow me to learn how to make this diy Christmas earrings with cube glass beads.

Before we start, you need to prepare the following jewelry making supplies:

4mm Mixed Color Cube Glass Beads

5mm Goldenrod Glass Bugle Beads

2mm Silver Glass Seed Beads

0.3mm Silver Copper Jewelry Wire

Silver Earring Hooks

Flat Nose Pliers

Side Cutting Pliers

Step 1：cut off two pieces of 0.3mm silver copper jewelry wire, whose length are about 40cm and 5cm. Then slide 10 cube glass beads onto the wire, make sure they are in the exact position as the first picture shows.

Step 2: make both ends of the shorter wire cross through the below beads, and at the same time, make the other end of the longer wire cross through the above beads to form the pattern like the second picture.

Step 3: cut off another 5cm copper wire, and slide 5 pieces golden glass beads onto it. Then slide the beads together with the short wire onto the longer wire.

Step 4: imitate step 2 to thread the shorter wire through the former pattern and at the same time, make the other end of the longer wire cross through the five beads to form the pattern like the final picture shows.

Step 5: use same means to fix more beads onto the pattern. When threading the longer wire through the last lining of beads, make sure the wire comes out from the third bead.

Step 6: make the two end of the wire cross through one piece of golden glass bead and tighten it on the top.

Step 7: slide five 2mm silver seed beads and two 5mm goldenrod bugle beads from one end of the wire, then make this end of the wire cross back the first seed bead and the golden glass bead.

Step 8: repeat step 7 to the left part.

Step 9: slide seventeen silver seed beads onto the wire and thread the wire through the golden glass bead to tight it. Cut off extra wires.

Step 10: attach an earring hook to the seed beads chain. And make another earring by same means.

OK, hold our breath and welcome our pure original handmade Christmas earrings!

They are irresistible, right? Because we dealt every process with carefulness, they won’t be easily damaged with all the glass beads tightened by copper wires. You could feel free to wear this pair of Christmas beaded earrings every day! Hope you like this tutorial, see you!

How to DIY Beaded Charm Bracelets in a Simple Way

Hi, my dear friends, Happy Thursday! Today I want to share a simple project on how to make bead and chain bracelets with you. If you are searching for some bracelets inspiration and have desire to make charm bracelets by yourself, never miss today’s sharing, follow me to learn the details together.

Supplies needed to DIY this glass bead charm bracelet:

6mm Faceted Normal Glass Beads 

Iron Cross Chains

3.5cm Iron Headpins

Plating Acrylic Beads

Brass Spring Clasps

Needle Nose Pliers

Round Nose Pliers

How to make this bead charm bracelet:

Step 1: slide one acrylic bead and one glass bead in sequence to the iron headpin like picture shows, then repeat the same ways to make about another fifty headpins beaded patterns like picture shows, finally connect these beaded patterns with the cross chain as picture shows.

Step 2: continue to connect all these glass and acrylic beaded patterns with the cross chain like picture shows, don’t forget to add one beaded pattern to the left end of the chain, finally attach a brass spring clasp to the right end of the chain and connect it with the left part of the chain as picture shows.

Your chic beaded charm bracelet is ready! Let’s appreciate it’s final look.

How about this bead and chain bracelet? Do you like it? It’s really simple to make, isn’t it? I like this beaded chain bracelet very much, because it can perfectly match any style of my sweaters. If you like such kind of glass bead bracelets, no hesitation, just follow this tutorial to have a try. May you a wonderful day, see you!

Simple to DIY Multi Strand Colorful Beaded Bracelets

Hi, my dear friends, do you want to make a handmade gift for your friends’ birthday or for some festival days. Here I wanna share you a tutorial on how to DIY this multi strand colorful beaded bracelet. I think it must be a good gift for female friends, especially for young girls. It’s really pretty and full of juice. If you are just looking for such a style of fresh bracelet, do not miss this one, let’s check the details together.

Jewelry making supplies needed to make these colorful beaded bracelets:

6mm White Round Pearl Beads

6x4mm Abacus Jade Beads

4mm Round Seed Beads

4mm Turquoise Beads

1mm Nylon Thread

Iron Scissor

Lighter

Two steps to finish this multi-strand bracelet:

Step 1: slide twenty-nine 6mm white pearl beads to the orange nylon thread, secondly slide thirty-four 6x4mm abacus jade beads to the red nylon thread, next continue to slide forty-six 4mm round seed beads to the blue nylon thread, then slide thirty-eight turquoise beads to the green nylon thread as picture shows, finally respectively make a knot on the two sides for the four nylon threads.

Step 2: firstly cut a piece of 1mm blue nylon thread, secondly hold the two ends of the bracelets together and make a knot with the blue nylon thread around the linking part, thirdly pass the left blue thread through the right hoop and pass the right blue thread through the left hoop like picture shows, next repeat the same ways to make more knots like picture shows, then cut off the excess blue nylon thread and make the ends smooth with a lighter, finally make a knot with the colorful nylon threads on the two sides one by one and cut off the excess nylon threads as picture shows.

Congratulations! This colorful beaded bracelet is completed, let’s appreciate it’s final look!

Do you love multi strand bracelets like this? This colorful beaded bracelet is very fresh and pretty, you can wear it to go shopping, to parties, dating and etc. Besides, it’s not hard to make and do not need too much time. It’s really a good and practical gift for friends, isn’t it? If you are interested in making such a style of colorful multi-strand bracelet, just follow this tutorial to have a nice try. May you a wonderful day, see you~