Easy Tutorial on Pretty Wire Wrapped Anklet Making

Hello, guys. Have a nice day! Do you often wear anklet? If yes, then you should pay much attention on today’s tutorial about how to make a wire wrapped pretty anklet. If no, I think you will want to wear it after seeing this post. So let’s see the making details together.

Supplies for wire wrapped anklet making:

10mm White Round Pearl Beads
8mm White Round Pearl Beads
2mm Blue Aluminum Wire
0.3mm and 0.5mm Silver Copper Wire
Headpins
Silver Cross Chain
Chain Nose Pliers
Round Nose Pliers
Side Cutting Pliers

Step 1: make the basic wire wrapped pattern.

Firstly, cut off a piece of aluminum wire with suitable length, and twist the wire into a drop shape.

Secondly, continue to twist the wire and make four same drop patterns. You can just do it with following this picture.

Step 2: add pearl bead

Firstly, twist the pattern with wire in the center to fix it. And Make several circles at the end of the aluminum wire.

Secondly, slide a pearl bead onto a piece of cooper wire and add the pearl bead onto the center of the pattern, then twist the wires together. 

Thirdly, finish this wire wrapped anklet making

Firstly, cut off a piece of cross chain and hang it on the wire pattern with cooper wire. Then cut the cross chain in the middle part, and fix the two ends and wire pattern with copper wire.

Thirdly, slide two pearl beads onto two headpins respectively and make loops at the end. Then add two bead dangles to the chain.

Then this wire wrapped anklet with pearl bead has been finished.

Do you like this body ornament? And now are you planning to make it for yourself? Trust me, it is a great choice to wear it in summer. Have a nice try! See you next time~

Cool Black Tattoo Bracelet Making with Seed Beads

Hi, friends. Have a nice day! How do you think of tattoo jewelry? Today, I am very excited to share you a tutorial on how to make a cool tattoo bracelet. Do you have any interest? Then follow me to see the bracelet making details.

Supplies needed for cool tattoo bracelet making:

1mm Black Leather Cord
Iron Jump Rings
4mm Black Seed Beads
Brass Folding Crimp Ends
Iron Cord Ends
Spring Clasp
Scissors
Lighter
Flat Nose Plier

Step 1: make the basic part of the tattoo bracelet

Firstly, cut off a piece of leather cord about 70cm, and fold it into half, then add a brass crimp end. And insert the two cords onto the end.

Secondly, fix the crimp end and cord with jewelry plier.

Thirdly, slide a black seed bead on the right cord and put the right cord downwards the left cord from the upside of the cords to make a knot.

Thirdly, slide a black seed bead onto the left cord and put the left cord downwards to make a another knot and you can do it as the step shows.

Step 2: finish this cool tattoo bracelet making

Firstly, repeat the same steps to make more patterns.

Secondly, do it until you get desired length, and take out a spring clasp, a jump ring and a cord end. Cut off the excess cord and insert the two cords in the cord end.

Thirdly, add the jump ring and clasp on the end to finish this bracelet making.

Cool tattoo bracelet, like it? You can have a nice try to make one for yourself. You know that tattoo jewelry is popular and you should collect the project, do not forget this wonderful post with your friends. See you next time! 

Pandahall promtion, hope you will have a nice shopping!

Orange Chain Bracelet Making with Pearl Beads

Hello, guys. Happy everyday! Today I cannot wait to show you a tutorial on how to make an orange chain bracelet with pearl beads. I love it very much so I hope share this post with you guys. Enjoy it~

Supplies needed for chain bracelet making:

Orange round chip acrylic beads
8mm white pearl beads
Golden iron chain
6mm jump rings
Golden lobster clasp
0.3mm golden copper wire
Wire cutting plier
Flat plier

Step 1: make orange beaded dangles

Firstly, take out sixty jump rings and sixty orange acrylic beads.

Secondly, connect one jump ring and one orange bead together. 

Step 2: add the chain

Firstly, cut off a piece of chain with sixty links.

Secondly, attach the beaded dangles onto the chain and ensure the one dangle for one link. 

Step 3: finish this chain bracelet

Firstly, cut off a piece of cooper wire about 60cm, and slide a pearl bead onto the wire. Then thread the cooper wire through the chain and slide second pearl bead. Then continue to slide beads and thread wire until the bracelet is filled.

Secondly, add jump rings and lobster claw clasp to the ends of the chain then connect the ends of the chain. 

Now you can see the final bracelet.

Simple tutorial yet very beautiful, right? If you like it, then just make it. You will be happier after see your own crafts, trust me. Then share this post with your friends. See you next time!

Easy Tutorial on How to Make Thread and Chain Bracelet

Hi, guys. Nice to meet you. How are you? Are you searching for any great jewelry projects? Do you like simple chain bracelet? If you do, then you can pay much attention on today’s tutorial. Next, I am going to show you a tutorial on how to make a simple bracelet with thread and chain. The details are listed as below.

Jewelry making supplies needed in making chain and thread bracelet:

Gold Star Clasp
Gold Cross Chain
Gold Brass Chain
Gold Jump Rings
Blue Nylon Thread
Scissors
Long Nose Plier

Step 1: make the basic part of the bracelet

Firstly, prepare two pieces of golden chain and two pieces of thread, and insert the thread into the holes of the two chains.

Secondly, continue to insert until you get your desired length. 

Step 2: finish this chain bracelet

Firstly, cut off two pieces of chain and add them to the ends of the thread pattern.

Secondly, connect the two ends of the chains with the star pattern.

Now this chain bracelet has been finished!

It is really an easy tutorial, right? Now, can you finish this thread and chain bracelet by yourself? Do not be afraid, just have a nice try and you may obtain not only the great crafts but also the pleasure. See you next time!

Mother's Day Gift-Tutorial on Felt Carnation Flower Bouquet Making

Hey, everyone. Have a nice day! We know that Mother’s Day is coming, so have you prepared the Mother’s Day gift? If not, you can see this post and learn to make a special and cool gift for your mom. Today, I am going to show you a tutorial on how to make a felt carnation flower bouquet with pearl beads. Do you have any interest? Then let’s see the details together.

Supplies needed for felt carnation flower bouquet making:

6mm White Round Pearl Beads
Felt
0.5mm Silver Copper Wire
1.5mm Green Aluminum Wire
Scissor
Glue Gun
Needle
Sewing Thread
Diagonal Plier

Step 1: make the first part of the flower bouquet

Firstly, cut several pieces of pink circular felt with jewelry pliers.

Secondly, take out one pink felt and fix the felt like this picture shows. Then sew the bottom with thread. Continue to make more same patterns.  

Step 2: make the second part of the flower bouquet

Firstly, cut the green felt into star shape.

Secondly, cut off a piece of aluminum wire and combine the star felt and the pink pattern we did last step with a piece of green aluminum wire. And fix them together with glue like picture shows.

Thirdly, continue to make another such same patterns.

Step 3: finish this carnation flower bouquet making.

Firstly, cut off two purple leaves just as the shape shown in this picture.

Secondly, cut off a piece of cooper wire and slide a pear bead onto it, then fold this wire and wrap the two wires together to fix the pearl bead.

Thirdly, combine the purple leaf with the wire wrapped pearl pattern.

Fourthly, continue to make same patterns.  

Fifthly, combine all the patterns to form a flower bouquet. Then this flower bouquet has been finished!

Look at the carnation flower bouquet, like it? Great Mother’s Day gift is a great way to express your love and gratitude for your mom. So just take an action and do it for her. You can see more Mother’s Day projects from here. See you next time!