DIY Flower and Pearl Beads Bracelet

Hey, guys. Do you like flower jewelry? How about flower beaded bracelet? Check this Pandahall tutorial on how to make flower and pearl beads bracelet if you are looking for any pretty bracelet patterns. Hoping you will like it.

Supplies needed for flower and pearl beads bracelet making:

8mm White Glass Pearl Beads
2mm Transparent Glass Seed Beads
Purple Acrylic Flower Beads
Tibetan Style Toggle Clasps
3mm Gold Bead Spacers
0.3mm Copper Wires
0.3mm Tiger Wires
Iron Jump Rings
Scissors
Glue Gun
Glue Stick

Instruction on how to make flower and pearl beads bracelet:

Step 1: Prepare the basic pearl beaded pattern

Firstly, cut off a piece of tiger wire and slide 12 transparent glass seed beads onto it, then cross wires through the middle seed beads;

Secondly, cross an 8mm glass pearl beads onto the wires and slide four pearl beads onto the wire;

Thirdly, cross another pearl bead and continue to make the same pearl beads pattern.

Step 2: Finish this pearl beaded pattern

Firstly, continue to make the pearl beads pattern until you get desired length;

Secondly, cross the wires through the pearl bead and add 12 glass seed beads onto the wire at the end of the beaded pattern;

Thirdly, tighten the wire and cut off the extra wire.

Step 3: Add flower beads

Firstly, slide a golden bead spacer onto a piece of wire and fold it in half, then slide a pearl bead onto it;

Secondly, slide a glass seed bead onto the wires, then make a loop and cut off the extra wires.

Thirdly, glue the purple acrylic flower bead onto the center of the dangle;

Fourthly, make many flower beads dangles with the same steps then add them onto the beaded pattern one by one. 

Step 4: Finish this flower and pearl beads bracelet making

Firstly, add the Tibetan style toggle clasp onto the ends of the pattern with the jump rings;

Secondly, connect the clasp to finish this bracelet making.

Then you can see the final flower and pearl beads bracelet:

Look at this flower bracelet, like it? You can make a piece of flower jewelry for yourself if you like. Look forward your great works, see you! 

Pretty Bracelet Making with Glass Beads and 2-Hole Seed Beads

Hey, guys. Have a nice day! Do you want to try any 2-hole seed beads jewelry? How about 2-hole seed beads bracelet? If you have any interest, follow me to see the details below on how to make a pretty bracelet with glass beads and 2-hole seed beads. Hope you will like it.

Supplies needed for this pretty bracelet making:

8mm Glass Round Beads Strand
5x3.5x3mm LightSkyBlue 2-Hole Seed Beads
6mm Jade Beads Strands
3mm Light Golden Acrylic Round Beads
11.5x6mm Round Brass Magnetic Clasps
0.3mm LightGrey Tiger Taily
Scissors

Instruction on how to make glass and 2-hole seed beads bracelet:

Step 1: Prepare the basic part of the beaded bracelet

Firstly, cut off a long piece of tiger wire and add the brass magnetic clasp onto it;

Secondly, slide a glass bead and a golden bead onto both wires, then cross two wires through a golden bead, a jade bead and a golden bead;

Secondly, slide three 2-hole seed beads onto the left wire and three seed beads, a golden bead, a jade bead and a golden bead onto the right wire, then cross the middle three beads;

Thirdly, tighten the wire and slide a pearl bead onto the left wire, a pearl bead, a jade bead and two golden beads onto the right wire. Then cross the wires through the beads like the picture shows.

Step 2: Continue to make more beaded patterns

Firstly, continue to add beads and make more same beaded patterns;

Secondly, attach the wires with the another end of the magnetic clasp and slide a golden bead onto them;

Thirdly, add two golden beads onto two pieces of wire, then thread the wires through the 2-hole seed beads;

Fourthly, add another two beads onto the pattern (as shown in the picture).

Step 3: Finish this glass and 2-hole seed beads bracelet

Tighten the wires and trim off the wire.

Now, this pretty glass and 2-hole seed beads bracelet has been finished!

Have you figured out the skills of this beaded bracelet making? Then prepare the materials and tools to make a beautiful bracelet with glass beads and 2-hole seed beads for yourself! Waiting for your fantastic works!

DIY Wire Wrapped Dragonfly Hanging Ornaments

Hi, friends. Do you need any interesting home decoration crafts? Then you cannot miss today’s post on how to wire make wrapped dragonfly hanging ornament. Just hang it on your room or the balcony, have a nice try. Let’s check the details below.

Supplies needed for wire wrapped dragonfly hanging ornament:

10x7mm Light Blue Electroplate Faceted Abacus Glass Beads
8x6mm Dark Salmon Faceted Abacus Glass Beads
8x6mm Clear Faceted Abacus Glass Beads
6mm Black Round Imitation Jade Beads
Headpins
0.5mm Tiger Wire
2mm Silver Aluminum Wire
7x11mm Pink Faceted Drop Glass Beads
10mm Yellow Round Jade Beads
Side Cutting Pliers
Chain Nose Pliers
Round Nose Pliers

Instruction on how to make wire wrapped dragonfly hanging ornament:

Step 1: make the first part of the wire wrapped dragonfly ornament

Firstly, cut off a piece of aluminum wire and twist it into this shape like below picture;

Secondly, make a loop at one end and three loops at the other end;

Thirdly, slide two black jade beads onto a piece of copper wire and wrap it around the two sides of the wire pattern;

Fourthly, slide a yellow jade bead onto a piece of copper wire and add it onto the second circle;

Fifthly, add another two yellow jade beads onto this copper wire and wrap them tightly.

Step 2: Make the second part of the wire wrapped dragonfly ornament

Firstly, cut off two pieces of aluminum wire and twist them like the below picture to make the wings;

Secondly, cut off another two pieces of aluminum wire and make loops at the two ends;

Thirdly, attach the loop shapes onto the wing with wrapping the copper wire;

Fourthly, slide a dark salmon glass bead, a light blue glass, a dark salmon glass bead and five clear glass beads onto a proper copper wire and wrap it onto wire pattern, then do it the same pattern with the other wing. 

Step 3: Finish this wire wrapped dragonfly ornament

Firstly, connect the two wings and the body by several pieces of copper wire;

Secondly, slide a drop glass bead and a clear glass bead onto a headpin, then hang the beads dangle onto the bottom of the dragonfly.

Now, this wire wrapped dragonfly hanging ornament has been finished.

Look at this cute craft, do you love it? Little ornament can make your home look warmer, do you agree me? I have an idea that you can make a smaller wire wrapped dragonfly pendant than it, than make a chain necklace. What a funny thought it is! Try it~

Pretty Jewelry Pattern- How to Make Wire Wrapped Star Bracelet with Glass Beads

Hi, friends. Do you like star jewelry? If yes, then congratulations! Today, I am going to show you a tutorial on how to make a pretty wire wrapped star bracelet with glass beads. Trust me, you will fall in love with it.

Supplies needed for wire wrapped star bracelet making:

10mm White Glass Pearl Beads
6mm Transparent Faceted Glass Beads
6mm Blue Faceted Glass Beads
4mm Blue Faceted Glass Beads
1.5mm Aluminum Wire
0.5mm Copper Wire
Iron Spring Clasp
Iron Eye Pin
Round Nose Plier
Side Cutting Plier

Instruction on how to make a star wire wrapped bracelet with glass beads:

Step 1: Make the basic pattern of star

Firstly, cut off a piece of aluminum wire and twist the wire into a star part, then fix the star wire with copper wire;

Secondly, make another three same wire stars;

Thirdly, slide transparent glass beads, 6mm blue glass beads and 4mm blue glass beads onto a piece of copper wire and add the beads onto the star with wrapping the copper wire around the wire star;

Fourthly, add more beads onto this wire star pattern (as shown in below picture).

Step 2: Finish this wire star bracelet

Firstly, make another three same wire star patterns and you can choose the number according to your wrist;

Secondly, make five 10mm pearl dangles with eyepins and make loops;

Thirdly, connect each two wire star patterns with a pearl dangle;

Fourthly, add a spring clasp onto the end of the bracelet.

Now, this wire wrapped star bracelet with glass beads has been finished.

Can you finish this wire wrapped bracelet alone by yourself? Please let me know if you have any question about the skills of this bracelet making. Hope you like it. See you next time!

Free Tutorial on How to Make Green 2-Hole Seed Beads Bracelet

Hello, guys. Do you like 2-hole seed beads jewelry? If yes, you should not miss today’s tutorial on how to make green 2-hole seed beads bracelet. This bracelet is mainly made by green seed beads, interesting, right? Then follow me to see the steps below.

Supplies needed for green 2-hole seed beads bracelet making:

5x3.5x3mm Green 2-Hole Seed Beads
0.3mm Green Glass Seed Beads
0.3mm GreenYellow Glass Seed Beads
Brass Jump Rings
Green Nylon Sewing Thread
Zinc Alloy Lobster Claw Clasps
Flat Nose Pliers
Scissors

Instruction on how to make green 2-hole seed beads bracelet:

Step 1: Start to slide the beads

Firstly, cut off a long piece of green nylon sewing thread and slide four green 2-hole seed beads onto it;

Secondly, cross the threads through the fourth seed bead, then add four greenyellow seed beads onto the pattern with needle;

Thirdly, slide two 2-hole seed beads and thread it through the next seed bead;

Fourthly, continue to add six 2-hole seed beads and do it at the same positions.

Step 2: Make the basic part of the beaded pattern

Firstly, add a green seed bead and thread it through three 2-hole seed beads (as shown in the picture);

Secondly, slide another three beads in the same positions;

Thirdly, slide another green seed bead and thread it through two 2-hole seed beads, then add another three beads in the same way.

Step 3: Finish this beaded pattern

Firstly, slide a greenyellow seed bead onto it and thread it through three 2-hole seed beads and a green seed bead;

Secondly, add another three greenyellow seed beads with the same step;

Thirdly, tighten the wire to finish a beaded pattern;

Fourthly, start to make another same beaded pattern with the above steps. 

Step 4: Finish this green seed beads bracelet

Firstly, continue to make more same beaded patterns and you can decide the amount according to your waist;

Secondly, add two green seed beads onto two ends;

Thirdly, add a jump ring and a lobster claw clasp onto the two ends of the beaded pattern.

Then this green seed beads bracelet has been finished!

Do you know to make it after seeing this tutorial? You just need to make it with following the steps one by one then you can get a fresh and chic bracelet. Have any interest? Try it!