Pretty Jewelry Pattern- How to Make Wire Wrapped Star Bracelet with Glass Beads

Hi, friends. Do you like star jewelry? If yes, then congratulations! Today, I am going to show you a tutorial on how to make a pretty wire wrapped star bracelet with glass beads. Trust me, you will fall in love with it.

Supplies needed for wire wrapped star bracelet making:

10mm White Glass Pearl Beads
6mm Transparent Faceted Glass Beads
6mm Blue Faceted Glass Beads
4mm Blue Faceted Glass Beads
1.5mm Aluminum Wire
0.5mm Copper Wire
Iron Spring Clasp
Iron Eye Pin
Round Nose Plier
Side Cutting Plier

Instruction on how to make a star wire wrapped bracelet with glass beads:

Step 1: Make the basic pattern of star

Firstly, cut off a piece of aluminum wire and twist the wire into a star part, then fix the star wire with copper wire;

Secondly, make another three same wire stars;

Thirdly, slide transparent glass beads, 6mm blue glass beads and 4mm blue glass beads onto a piece of copper wire and add the beads onto the star with wrapping the copper wire around the wire star;

Fourthly, add more beads onto this wire star pattern (as shown in below picture).

Step 2: Finish this wire star bracelet

Firstly, make another three same wire star patterns and you can choose the number according to your wrist;

Secondly, make five 10mm pearl dangles with eyepins and make loops;

Thirdly, connect each two wire star patterns with a pearl dangle;

Fourthly, add a spring clasp onto the end of the bracelet.

Now, this wire wrapped star bracelet with glass beads has been finished.

Can you finish this wire wrapped bracelet alone by yourself? Please let me know if you have any question about the skills of this bracelet making. Hope you like it. See you next time!

Free Tutorial on How to Make Green 2-Hole Seed Beads Bracelet

Hello, guys. Do you like 2-hole seed beads jewelry? If yes, you should not miss today’s tutorial on how to make green 2-hole seed beads bracelet. This bracelet is mainly made by green seed beads, interesting, right? Then follow me to see the steps below.

Supplies needed for green 2-hole seed beads bracelet making:

5x3.5x3mm Green 2-Hole Seed Beads
0.3mm Green Glass Seed Beads
0.3mm GreenYellow Glass Seed Beads
Brass Jump Rings
Green Nylon Sewing Thread
Zinc Alloy Lobster Claw Clasps
Flat Nose Pliers
Scissors

Instruction on how to make green 2-hole seed beads bracelet:

Step 1: Start to slide the beads

Firstly, cut off a long piece of green nylon sewing thread and slide four green 2-hole seed beads onto it;

Secondly, cross the threads through the fourth seed bead, then add four greenyellow seed beads onto the pattern with needle;

Thirdly, slide two 2-hole seed beads and thread it through the next seed bead;

Fourthly, continue to add six 2-hole seed beads and do it at the same positions.

Step 2: Make the basic part of the beaded pattern

Firstly, add a green seed bead and thread it through three 2-hole seed beads (as shown in the picture);

Secondly, slide another three beads in the same positions;

Thirdly, slide another green seed bead and thread it through two 2-hole seed beads, then add another three beads in the same way.

Step 3: Finish this beaded pattern

Firstly, slide a greenyellow seed bead onto it and thread it through three 2-hole seed beads and a green seed bead;

Secondly, add another three greenyellow seed beads with the same step;

Thirdly, tighten the wire to finish a beaded pattern;

Fourthly, start to make another same beaded pattern with the above steps. 

Step 4: Finish this green seed beads bracelet

Firstly, continue to make more same beaded patterns and you can decide the amount according to your waist;

Secondly, add two green seed beads onto two ends;

Thirdly, add a jump ring and a lobster claw clasp onto the two ends of the beaded pattern.

Then this green seed beads bracelet has been finished!

Do you know to make it after seeing this tutorial? You just need to make it with following the steps one by one then you can get a fresh and chic bracelet. Have any interest? Try it!

DIY Yellow 2-Hole Seed Beads Flower Bracelet for Summer

Hi, friends. Are you lack of bracelet for this summer? If yes, then you can see today’s Pandahall tutorial on how to make a flower bracelet with yellow 2-hole seed beads and pearl beads. Have you any interest in it? Now follow me to see the details below.

Supplies needed for 2-hole seed beads flower bracelet:

6mm White Glass Beads Strands
Brass Jump Rings
0.3mm Lightgrey tiger tail
5x3.5x3mm Yellow 2 -Hole Seed Beads
2x2mm Purple Glass Round Seed Beads
Tibetan Style Toggle & Tbar
8mm Glass Round Beads Strand
Golden Eyepins
Chain Nose Pliers
Round Nose Pliers
Scissors

Instruction on how to make yellow 2-hole seed beads flower bracelet:

Step 1: start to make the flower beaded pattern

Firstly, slide four 2-hole seed beads onto with left holes, a seed bead with right hole, a seed bead with left hole and four seed beads with right holes onto a long piece of tiger tail;

Secondly, cross the both wires through the fifth seed bead;

Thirdly, slide a 6mm glass bead onto the both wires and thread the two wires through the inside hole of the opposite seed bead and tight them.

Step 2: Make enough flower beaded patterns

Firstly, thread one of the wire through a purple seed bead and through the outside hole of the next yellow seed bead;

Secondly, continue to add purple seed beads and through the holes until the flower pattern has been finished, then tighten it and cut off the extra wire;

Thirdly, continue to make flower beaded patterns until you get 13 in total.

Step 3: finish the flower beaded bracelet making

Firstly, slide 8mm glass beads into the eyepins to make dangles, and make 16 dangles in total;

Secondly, connect the flower beads pattern and the glass bead dangles, you can do it as the picture shows;

Thirdly, add Tibetan style toggle and tbar to the ends of the bracelet, then connect them.

Now, this flower bracelet has been finished!

Have you got the skills of the flower beaded bracelet making? You can see this tutorial again if there is anything you do not understand. Prepare the supplies and tools firstly then you can start your works. See you!

DIY Elegant Wire Wrapped Flower Bracelet with Pearl Beads

Hello, friends. How are you? Are you searching for any pretty bracelet project? If yes, I think today’s tutorial on how to make elegant wire wrapped flower bracelet is a great choice for you. Hope you will like it.

Supplies needed for wire and pearl beads bracelet making:

8mm Oval Natural Pearl Beads
8mm White Pearl Beads
6mm Transparent Faceted Glass Beads
0.3mm Copper Wire
Iron Eye Pins
Iron Spring Clasp
Round Nose Plier
Scissors

Instruction on how to make wire and pearl beads bracelet:

Step 1: make the flower beaded pattern of the bracelet

1^st, cut off a piece of cooper wire, and slide an 8mm oval pearl bead onto it. Then twist the wire together.

2^nd, make another wire wrapped and pearl pattern, then twist the two beaded patterns together.

3^rd, make another two pearl beads petals and twist four petals together.

4^th, slide a faceted glass bead onto a piece of cooper wire and make it as the bud.

Step 2: add beads to the flower beaded pattern

1^st, slide an oval pearl bead onto a piece of cooper wire and twist it with the flower pattern.

2^nd, add a glass bead wire dangle and an oval pearl bead wire dangle, then twist them together.

3^rd, do the same patterns at the left side.

Step 3: finish this wire and beads bracelet

1^st, slide an 8mm pearl bead onto an eyepin and make a simple loop. Then make many pearl beads dangles with the same steps.

2^nd, connect the pearl dangles together and make two pearl beads strands.

3^rd, connect the two beads strands at the two ends of the flower pattern.

4^th, add a claw clasp at one end of the dangle, then connect the two ends of the bracelet. 

Then this wire and beads bracelet has been finished!

Look at this pearl and glass beaded bracelet, do you like it? You can also create your own bracelet and make more branches. Hope this bracelet project can bring you any inspiration. See you next time!

DIY Simple and Pretty Suede Cord Bracelet for Beginners

Hi, friends. Have you ever made jewelry before? Do you want to try to make any crafts for yourself? If yes, then I think you can see this post. Today I am going to show you a tutorial on how to make a simple and pretty bracelet for beginner. It is a definitely great idea for you to have a nice try. Then just prepare the supplies and start your works soon.

Supplies needed for suede cord bracelet making:

3MM Suede Cord
Brass Chain
Bead Cap
0.3MM Copper Wire
Jump rings
Lobster Clasp

Step 1: make the basic pattern of the bracelet

Firstly, cut off a piece of chain with suitable length and a piece of cord which is a little longer than the chain.

Secondly, make a simple knot at the end of the cord, then open the first ring of the chain and pass the knot to the ring then close it.

Thirdly, pass the cord to the second link, and tighten them. Then pass the cord to another link from opposite direction.

Fourthly, then continue to slide the cord to other links of the chain until you get desired length, just as the picture shows.

Fifthly, cut off the extra cord and tie a simple knot at the end of the cord.

Sixthly, trim off the excess cord.

Step 2: make the tassel for this cord bracelet

Firstly, cut off five pieces of cords and gather them.

Secondly, cut off a piece of cooper wire and wrap the cords with cooper wire, then twist the wires.

Thirdly, add a bead cap onto the wires. Then cut off extra wires and make a loop.

Step 3: finish this tassel cord bracelet

Add a jump ring and a lobster claw clasp to the pattern and connect this bracelet. 

Then this chain and tassel cord bracelet has been finished!

Great! Have you done it? It is very fantastic of you to make such a beautiful bracelet. Please just leave a comment if you have any question about this bracelet making. Share it if you love it. See you next time!
Check Pandahall.com to get the 5% off your order with the code JunBLOGEN5OFF. Have a nice shopping!

Cool Black Tattoo Bracelet Making with Seed Beads

Hi, friends. Have a nice day! How do you think of tattoo jewelry? Today, I am very excited to share you a tutorial on how to make a cool tattoo bracelet. Do you have any interest? Then follow me to see the bracelet making details.

Supplies needed for cool tattoo bracelet making:

1mm Black Leather Cord
Iron Jump Rings
4mm Black Seed Beads
Brass Folding Crimp Ends
Iron Cord Ends
Spring Clasp
Scissors
Lighter
Flat Nose Plier

Step 1: make the basic part of the tattoo bracelet

Firstly, cut off a piece of leather cord about 70cm, and fold it into half, then add a brass crimp end. And insert the two cords onto the end.

Secondly, fix the crimp end and cord with jewelry plier.

Thirdly, slide a black seed bead on the right cord and put the right cord downwards the left cord from the upside of the cords to make a knot.

Thirdly, slide a black seed bead onto the left cord and put the left cord downwards to make a another knot and you can do it as the step shows.

Step 2: finish this cool tattoo bracelet making

Firstly, repeat the same steps to make more patterns.

Secondly, do it until you get desired length, and take out a spring clasp, a jump ring and a cord end. Cut off the excess cord and insert the two cords in the cord end.

Thirdly, add the jump ring and clasp on the end to finish this bracelet making.

Cool tattoo bracelet, like it? You can have a nice try to make one for yourself. You know that tattoo jewelry is popular and you should collect the project, do not forget this wonderful post with your friends. See you next time! 

Pandahall promtion, hope you will have a nice shopping!

DIY Your Own Colorful Seed Bead Tassel Bracelet

The scorching summer is on its way, do you still feel sorry that your wardrobe is only full of the color black and white? Then this colorful seed bead tassel bracelet tutorial you cannot miss. The bright colors and the cute tassels together make this beaded bracelet focus of the attention.
Things needed
Colorful seed beads
Gold seed beads
Metallic embroidery floss
Lobster clasps
Jumprings
Plier
Monofilament

Instructions on How to Make Beaded Tassel Bracelet
First, cut the monofilament to about 1m and fold in half. And thread a jumpring onto the monofilament and tie a knot on the end of the line.
Second, string a needle onto the line and add seed beads in the following order as what the picture shows.
Third, remove the needle and tie on the lobster clasp. Fasten the knot and trim off the extra part.
Fourth, wrap the metallic embroidery floss around two of your fingers and then put your jumpring through the middle of the string loop.
Fifth, wrap the string below the jumpring and double knot. And then cut the loops to form the tassel and then attach the tassel to the beaded bracelet.
Now, this cute and adorable seed bead bracelet is instantly finished! Those fabulous colorful beaded bracelet undoubtedly will enliven your wardrobe and add a bit of sunshine to your accessories. It is awesome that I can’t help making a dozen of them for my friends. Just go for it!