DIY Yellow 2-Hole Seed Beads Flower Bracelet for Summer

Hi, friends. Are you lack of bracelet for this summer? If yes, then you can see today’s Pandahall tutorial on how to make a flower bracelet with yellow 2-hole seed beads and pearl beads. Have you any interest in it? Now follow me to see the details below.

Supplies needed for 2-hole seed beads flower bracelet:

6mm White Glass Beads Strands
Brass Jump Rings
0.3mm Lightgrey tiger tail
5x3.5x3mm Yellow 2 -Hole Seed Beads
2x2mm Purple Glass Round Seed Beads
Tibetan Style Toggle & Tbar
8mm Glass Round Beads Strand
Golden Eyepins
Chain Nose Pliers
Round Nose Pliers
Scissors

Instruction on how to make yellow 2-hole seed beads flower bracelet:

Step 1: start to make the flower beaded pattern

Firstly, slide four 2-hole seed beads onto with left holes, a seed bead with right hole, a seed bead with left hole and four seed beads with right holes onto a long piece of tiger tail;

Secondly, cross the both wires through the fifth seed bead;

Thirdly, slide a 6mm glass bead onto the both wires and thread the two wires through the inside hole of the opposite seed bead and tight them.

Step 2: Make enough flower beaded patterns

Firstly, thread one of the wire through a purple seed bead and through the outside hole of the next yellow seed bead;

Secondly, continue to add purple seed beads and through the holes until the flower pattern has been finished, then tighten it and cut off the extra wire;

Thirdly, continue to make flower beaded patterns until you get 13 in total.

Step 3: finish the flower beaded bracelet making

Firstly, slide 8mm glass beads into the eyepins to make dangles, and make 16 dangles in total;

Secondly, connect the flower beads pattern and the glass bead dangles, you can do it as the picture shows;

Thirdly, add Tibetan style toggle and tbar to the ends of the bracelet, then connect them.

Now, this flower bracelet has been finished!

Have you got the skills of the flower beaded bracelet making? You can see this tutorial again if there is anything you do not understand. Prepare the supplies and tools firstly then you can start your works. See you!

Easy Project-Wire Wrapped Flower Beads Earrings Making

Hello, friends. Are you looking for any wire wrapped projects? If yes, you can look here, today I am going to show you a tutorial on how to make a pair of wire wrapped flower beads earrings. Do you have any interest? You can see the details first then have a nice try!

Supplies needed for wire wrapped flower beads earrings making:

Synthetical Turquoise Beads Strands
8mm Glass Pearl Beads Strands
2mm Aluminum Wire
0.3mm Copper Wire
0.8mm Copper Wire
Jump Rings
Earrings Hooks
Chain Nose Pliers
Side Cutting Pliers
Round Nose Pliers
Scissors

Instruction on how to make wire wrapped flower beads earrings:

Step 1: make the basic wire pattern

1^st, cut off a piece of aluminum wire and make a simple loop at one end;

2^nd, twist the wire into a circle and make another loop, then cut off the extra wire.

Step 2: add turquoise beads onto the wire pattern

1^st, cut off a piece of long 0.8mm copper wire and wrap one end of it onto the aluminum wire pattern, then slide six turquoise beads onto it and fix the two wires together (as shown in below picture);

2^nd, slide another six turquoise beads onto the wire and twist the wires together to fix them;

3^rd, continue to slide another three same patterns and wrap the end of the wire around the aluminum wire for several circles.

Step 3: make a beaded flower

1^st, cut off a piece of 0.3mm copper wire and slide a turquoise bead onto it, then fold the wire into half;

2^nd, slide a pearl bead onto both of the wires and slide a turquoise bead onto one of the wire, then cross the both wires through the bead;

3^rd, slide four turquoise beads onto the wire and slide the wire through the first bead;

4^th, slide another three turquoise beads onto the wire and slide the middle bead onto the wire, then fix two wires together and cut off the extra wire.

Step 4: finish wire wrapped flower beads earrings

1^st, attach this beaded flower onto the top of the wire and beads pattern by a jump ring;

2^nd, add an earring hook onto the pattern. 

You just need to make another same earring with the same steps and this pair of wire wrapped flower beads has been finished!

Wow, look at them. Special design, right? Easy project and you can have a nice try. Please kindly let me know I if you have any question about the earrings making. See you next time! 
Use coupon code JL5OFFBLOGEN628 to get 5% off your orders. Then check Pandahall.com now!

Easy Tutorial on How to Make a Pair of Rhombus Wire Wrapped Dangle Earrings

Hello, guys. Have a nice day! Hope everything is great with you and your lovely family. In today’s tutorial, I will show you how to make a pair of rhombus wire wrapped earrings. Do you have any interest? If yes, then please follow me to see the making details.

Supplies needed for rhombus wire wrapped earrings:

14x7mm Clear Faceted Drop Glass Beads
0.5mm Gold Copper Wire
Golden Earring Hooks
1.5mm Golden Aluminum Wire
Needle Nose Plier
Round Nose Plier
Diagonal Plier

Instruction on how to make a pair of rhombus wire earrings:

Step 1: make the rhombus wire pattern

1^st, cut off a piece of aluminum wire and twist it into a rhombus shape.

2^nd, make a loop at the ends of the aluminum wire.

3^rd, cut off a piece of cooper wire and wrap the two ends and fix them.
4^th, add an earring hook on the top of the rhombus pattern

Step 2: finish the rhombus wire wrapped earrings

1^st, cut off a piece of cooper wire and slide a clear faceted drop glass bead. Then attach it to one corner of the rhombus pattern, and twist the cooper wire and aluminum wire together.

2^nd, do the same beaded patterns onto the three corners of the rhombus and you can see the below picture. 

3^rd, make another same earring with the same steps.

Then you can see the final look of the rhombus wire wrapped earrings.

Then this pair of rhombus wire wrapped earrings has been finished. Do you also love them? It is easier than you imagine, right? Just follow this tutorial and make one for yourself. See you next time!

DIY Elegant Wire Wrapped Flower Bracelet with Pearl Beads

Hello, friends. How are you? Are you searching for any pretty bracelet project? If yes, I think today’s tutorial on how to make elegant wire wrapped flower bracelet is a great choice for you. Hope you will like it.

Supplies needed for wire and pearl beads bracelet making:

8mm Oval Natural Pearl Beads
8mm White Pearl Beads
6mm Transparent Faceted Glass Beads
0.3mm Copper Wire
Iron Eye Pins
Iron Spring Clasp
Round Nose Plier
Scissors

Instruction on how to make wire and pearl beads bracelet:

Step 1: make the flower beaded pattern of the bracelet

1^st, cut off a piece of cooper wire, and slide an 8mm oval pearl bead onto it. Then twist the wire together.

2^nd, make another wire wrapped and pearl pattern, then twist the two beaded patterns together.

3^rd, make another two pearl beads petals and twist four petals together.

4^th, slide a faceted glass bead onto a piece of cooper wire and make it as the bud.

Step 2: add beads to the flower beaded pattern

1^st, slide an oval pearl bead onto a piece of cooper wire and twist it with the flower pattern.

2^nd, add a glass bead wire dangle and an oval pearl bead wire dangle, then twist them together.

3^rd, do the same patterns at the left side.

Step 3: finish this wire and beads bracelet

1^st, slide an 8mm pearl bead onto an eyepin and make a simple loop. Then make many pearl beads dangles with the same steps.

2^nd, connect the pearl dangles together and make two pearl beads strands.

3^rd, connect the two beads strands at the two ends of the flower pattern.

4^th, add a claw clasp at one end of the dangle, then connect the two ends of the bracelet. 

Then this wire and beads bracelet has been finished!

Look at this pearl and glass beaded bracelet, do you like it? You can also create your own bracelet and make more branches. Hope this bracelet project can bring you any inspiration. See you next time!

Nice Tutorial on How to Make Heart Wire Wrapped Necklace

Hello, friends. Do you need any wire wrapped jewelry? How do you think of wire wrapped necklace? If you are looking for any wire and beads necklace tutorial, then look here, you can have a nice try to make a heart wire wrapped necklace after seeing this project. Hope it is helpful for you.

Supplies needed for heart wire wrapped necklace:

Brass Twist Chains
1.5MM AluminumWire
0.3MM Copper Wire
Brass Lobster Claw Clasp
Handmade Glass Beads

Step 1: make the basic wire wrapped pattern

Firstly, cut off a piece of aluminum wire and make coiling circles at one end.

Secondly, twist the wire into weave shape, then make two circles at another end.

Step 2: finish the heart wire wrapped pendant

Firstly, cut off a piece of aluminum wire about 5cm, and twist the wire into a “v” shape.

Secondly, add the “v” shape into the first weave, then connect them with cooper wire, and left 1cm wire unwrapped.

Thirdly, twist the left unwrapped wire into a circle to make the wire heart pattern.

Fourthly, add another four “v” shapes to make another same four heart patterns. Then cut off the extra wire.

Fifthly, cut off a piece of cooper wire about 8cm, then slide a 6mm glass bead onto the wire. And add the bead onto the middle heart pattern of the pendant, then fix them with wrapping the cooper wires.

Step 3: finish this heart wire wrapped necklace

Firstly, cut off two pieces of brass twist chain, then add a jump ring and a lobster claw clasp.

Secondly, connect two ends of the chains.

Here is the final look of the heart wire wrapped pendant necklace!

Cool wire jewelry design, do you like it? You can have a nice try to make one for yourself. And please just share us your works if you have greater wire necklace making ideas. Look at below picture about Pandahall promotion, use JL50FFBLOGEN628 to get 5% off your orders. See you!

DIY Simple and Pretty Suede Cord Bracelet for Beginners

Hi, friends. Have you ever made jewelry before? Do you want to try to make any crafts for yourself? If yes, then I think you can see this post. Today I am going to show you a tutorial on how to make a simple and pretty bracelet for beginner. It is a definitely great idea for you to have a nice try. Then just prepare the supplies and start your works soon.

Supplies needed for suede cord bracelet making:

3MM Suede Cord
Brass Chain
Bead Cap
0.3MM Copper Wire
Jump rings
Lobster Clasp

Step 1: make the basic pattern of the bracelet

Firstly, cut off a piece of chain with suitable length and a piece of cord which is a little longer than the chain.

Secondly, make a simple knot at the end of the cord, then open the first ring of the chain and pass the knot to the ring then close it.

Thirdly, pass the cord to the second link, and tighten them. Then pass the cord to another link from opposite direction.

Fourthly, then continue to slide the cord to other links of the chain until you get desired length, just as the picture shows.

Fifthly, cut off the extra cord and tie a simple knot at the end of the cord.

Sixthly, trim off the excess cord.

Step 2: make the tassel for this cord bracelet

Firstly, cut off five pieces of cords and gather them.

Secondly, cut off a piece of cooper wire and wrap the cords with cooper wire, then twist the wires.

Thirdly, add a bead cap onto the wires. Then cut off extra wires and make a loop.

Step 3: finish this tassel cord bracelet

Add a jump ring and a lobster claw clasp to the pattern and connect this bracelet. 

Then this chain and tassel cord bracelet has been finished!

Great! Have you done it? It is very fantastic of you to make such a beautiful bracelet. Please just leave a comment if you have any question about this bracelet making. Share it if you love it. See you next time!
Check Pandahall.com to get the 5% off your order with the code JunBLOGEN5OFF. Have a nice shopping!